Private label production, currently, we are offering 5 items as shown below. These products are designed by Power Enterprise and 100% made in Japan.
1. Head Gasket (special molding, if any, by your request, cost approx. $6000 per mold)
* Please refer to the web page http://www.powerenterpriseusa.net/products/engine/gasket/gasket.html for the molds we currently have.
* The sizes can be changed to some extent (considering the seal area strength of the gasket), but there some additional fee would be applied.
* Minimum order quantity is 100 per application
* Lead time: 30 to 45 days
* Payment: 50% deposit required and the remaining balance due on delivery
2. Timing Belt Possible Type of teeth: R, RU, Y, YS & YU
* Please refer to the web page http://www.powerenterpriseusa.net/products/engine/timing_belt/timing_belt.htm for the details of product.
* Current version uses E-660 Kevlar + NBR (better than the previous 2006 production)
* The color can be specified by you and can be matched within 90%
* Your company Logo 4" length can be printed on the product
*
Minimum order quantity is 100 per application
* Lead time: First production 90 days, Repete production 60 days
* Payment: 50% deposit required and the remaining balance due on delivery
3. Drive Belt
* Please refer to the web page http://www.powerenterpriseusa.net/products/engine/v_belt/index.htm for the details of product.
*
The color can be specified by you and can be matched within 90%
* Your company Logo 4" length can be printed on the product during the production
* Minimum order quantity is 100 per application
* Lead time: First production 90 days, Repete production 60 days
* Payment: 50% deposit required and the remaining balance due on delivery
4. Engine Bearing (F1 Black Metal)
* Please refer to the web page http://www.powerenterpriseusa.net/products/engine/metal/f1_metal.htm for the details of product.
* Minimum order quantity is 20 sets per application
* Lead time: 30 to 45 days
* Payment: 50% deposit required and the remaining balance due on delivery
4. Oil Filter
* Please refer to the web page http://www.powerenterpriseusa.net/products/engine/oil_filter/index.htm for the details of product.
* Minimum order quantity is 200 per application
* Lead time: 30 to 45 days
* Payment: 50% deposit required and the remaining balance due on delivery
|
 |
 |
 |
|
 |
1400 HP Rated |
 |
|
 |
POWER ENTERPRISE USA product disclaimer
Accuracy of the information contained on Power Enterprisefs website and all printed materials, accepts no responsibility for typographical or informational errors or omissions. Prices, applications, product specifications, and/or part numbers are subject to change without notice.
The products manufactured and sold by Power Enterprise USA., Inc are designed for off-road & racing purposes only. These products are designed to be used in vehicles that may never be driven on public highways or streets. Unless Power Enterprise USA states or notes, in writing, the consumer/purchaser assumes all risks and expenses from product use. PLEASE CHECK LOCAL LAW LISTINGS BEFORE DRIVING WITH PRODUCT(S) ON PUBLIC ROADS
Contact:
POWER ENTERPRISE USA Inc. (USA Sales Office)
17155 Von Karman Ave. # 108 Irvine, CA 92614
Main Phone : 949-752-0645 |
  |
|
|
