The Fastest Spooling Turbo In The World!  Now the #1 Choice In WRC!!
POWER ENTERPRISE Special IHI RX6R Seriese 350 to 650 HP Selections

RX6R setup kit available for CN9A / CP9A / CT9A models

The RX6R turbine with external waste gate system. The strong ball bearing firmly supports the turbine shaft all directions makes superior boost response at all range due to non-exocentric spinning of blades.
Click the image to see a large picture
Lancer Evolution 4G63 RX6R Setup (Pro) KIT,  Designed for tuner shops
RX6R, a compact and light weight ball bearing turbine, known for the Formula-1 racing is now available through Power Enterprise, the largest IHI turbo distributor in the world. With engine internal upgrades, it can produce well over 600 wheel HP. The exhaust and compressor housings can separately be selected and matched for each engine specs. The 4G63 RX6R kit can be installed on the vehicle types CN9A / CP9A / CT9A with stock intercooler by fabricating your own inlet and intercooler piping. Large volume fuel pump and injectors are sold separately Setup Kit consist of RX6R turbo, Stainless EX manifold, Outlet pipe & Front pipe, Waste gate valve, Oil lines, Gasket set and hard wares.
Applicable Engines: 4G63(EVOⅣ～EVOⅨ) Power Capability: 450HP～650+HP(depending on the engine's strength upgrades)  MSRP: 4G63 Setup pro kit $5700 (all the components shown on the picture left)
Installation Guide

Be sure to check the blue tag on the turbo to ensure
the quality and specs of Power-IHI







4 different sizes of compressors, TCW10, 15, 76 & 77, performance are shown here for your target power settings on the 4G63 engine. You can customize the kit from four different types of compressor housings and six types of exhaust housings to make the most suitable turbo unit for your power setting. See chart below
The kit adopts a 76.3mm large diameter exhaust front pipe, which designed to spool the turbine quicker by reducing the exhaust backpressure. Another remarkable feature is returning the exhaust gas come out of the waste gate back into the front pipe, instead of releasing the waste gate gas directly into the atmosphere, to help reduces the noise and eliminates pollutions. The exhaust manifolds are heat-treated for durability and strength against cracks.

    
For more detail, go to RX6R spec & price page

Combinations of RX6R Turbo Charger Assemblies you can select
TCW 10
A/R 13
TCW 76
A/R 13
TCW 10
A/R 18
TCW 76
A/R 18
TCW 10
A/R 20
TCW 76
A/R 20
TCW 10
A/R 22
TCW 76
A/R 22
TCW 10
A/R 25
TCW 76
A/R 25
TCW 10
A/R 27
TCW 76
A/R 27
 
   
TCW 15
A/R 13
TCW 77
A/R 13
TCW 15
A/R 18
TCW 77
A/R 18
TCW 15
A/R 20
TCW 77
A/R 20
TCW 15
A/R 22
TCW 77
A/R 22
TCW 15
A/R 25
TCW 77
A/R 25
TCW 15
A/R 27
TCW 77
A/R 27


           
Attentions to PWR product users:
If you are not sure of how to install the products of Power Enterprise, please call Power Enterprise USA office or consult with your products seller/tuner shops where you purchased from. Warning: POWER strongly recomends not to purchase the POWER products through any party who dose not have installation facility nor proper technical knowledges of POWER products. POWER is not responsible for any product damage caused by improper installations and will not accept any claims. PWR accepts issues of warranties only through POWER authrized dealers and tuner shops.